Quick release paper, tape and wood wedge for tooling
5 lbs. Hotmelt Rubber
Pea gravel, white sand, brown sand for color / texture match
TRIP FIX GALLERY:
Instructions plus online link to watch process
* Thermo Trip Fix kit includes: 5 lbs. of KwixSeal Hotmelt Rubber; Color sand, Pea Gravel along with other items you will need to install approximately 5 linear feet of 1" x 2" toe trip area. You will need an old cooking pan (or similar) to heat and apply the material.
DIY & Save
To fix toe trip hazards on your sidewalk or driveway can be expensive and take a lot of your time or having to hire a professional to do it. Your standard options include replacing the section of concrete or grinding down the high side of the hazard. Depending on what is causing the problem both methods may be only temporary and the color and texture is diffucult to match the original section poured. Cutting or grinding the high side of the concrete is most likely the fastest method used however, this method diminishes the structural integrity of the concrete and does not fix what is causing the problem. In many cases, this may have to be repeated by cutting away even more material. Bottom line is: this is an expensive, temporary repair used by companies to meet A.D.A. complience for their facility.
Cutting or Grinding is expensive and looks bad
Raised Sidewalk: Exposed Aggregate; 1" x 24"
Thermo Trip Fix Installed
THERMO TRIP FIX KIT INCLUDES:
Youtube of expensive concrete cutting from national franchise.
Kwixseal hotmelt rubber can be melted and poured into place to provide a quick, safe and inexpensive long term durable solution to get rid of toe trip hazzards in sidewalks.
Before and after installing Thermo Trip Fix 3" H x 24" L on 20 year old exp. agg.
Extreme grinding failure: slab is
only 4" thick. You cut away over
an inch and risk having this happen.
Faster, better, cheaper and looks better than cutting!