HMR MATERIALS, SYSTEMS & COMPONENTS
HMR BLOCKS 5# - For use in HMR POUR POTS
HMR - 5 lb. brick, GRAY, Part # HMR-G5 $25.00 ea.
HMR - 5 lb. brick, BLACK, Part # HMR-B5 $25.00 ea.
HMR - 5 lb. brick, SANDSTONE, Part # HMR-S5 $25.00 ea.
HMR BLOCKS 10# - For use in HMR MELTERS, filling holes & misc. use
HMR - 10 lb. brick, GRAY, Part # HMR-G10 $50.00 ea.
HMR - 10 lb. brick, BLACK, Part # HMR-B10 $50.00 ea.
HMR - 10 lb. brick, SANDSTONE, Part # HMR-S10 $50.00 ea.
HMR BLOCKS 25# - For use in HMR 100# STATIONARY MELTER
HMR - 25 lb. brick, GRAY, Part # HMR-G10 $125.00 ea.
HMR - 25 lb. brick, BLACK, Part # HMR-B10 $125.00 ea.
HMR - 25 lb. brick, SANDSTONE, Part # HMR-S10 $125.00 ea.
KwixSealer Rover - $8995
Self contained Hot Melt Rubber application unit.
* Mobile hot melt unit
* 10 gal. (min.) insulated metal tank
* 10 foot heated hose
* Heated hand gun
* Heavy duty material pump
* External electronic control box
* Solid steel cart
* Locking front wheels
* Available in 100V or 220V
Pour pots make installing HMR fast, easy and best of all, inexpensive! The metal pots can be used as a stand alone solution to heat HMR 5 lb. blocks or can be filled directly with pre-heated HMR from a stationary melter. Pour pots are heated on electric or propane operated heating devices that can be situated near your work area. Makes an ideal solution for areas that are upstairs, in tight areas or when using larger equipment is not needed.
HMR POUR POT, Part # HMR-POT-SM
Cost per linear foot for 5/8" wide x 1/4" deep expansion joint is less than .50 cents a foot (estimated).
Watch HMR Product Demonstration ------>
Fill HMR POUR POT with HMR TAPE, 5# HMR BLOCKS or from HMR Melter.
Watch HMR Product Demonstration ------>
* Options include tank size / capacity, heated hose lengths, hand gun tip size & wand extensions.
No expensive equipment to buy!
HMR TAPE has no clear plastic wrapping to melt off which can damage material from scorching and over-heating of material.
Allow 2-3 weeks for delivery
HMR BLOCKS used in HMR Melters or used to fill holes, adhere road markers, etc.
HOT MELT RUBBER SYSTEMS & COMPONENTS
KwixSeal SYSTEM & COMPONENTS
HMR 110V Electric Stationary Tank - $1800
Heats and holds up to 100 lbs. of hot melt material on metal stand ready to deliver ready hot melt material into Rover units.
Steel Cart Sold Seperately - $350
Contact us for pricing & Availability
Watch HMR Product Demonstration ------>
HMR TAPE 25 ft. Roll *Standard size 7/8"x 1/4" ( .90 cents / ft.) *
HMR TAPE, GRAY, Part # HMR-T25G
HMR TAPE, SANDSTONE, Part # HMR-T25S
HMR TAPE 100 ft. *Standard size 7/8"x 1/4" ( .80cents / ft.) *
HMR TAPE, GRAY, Part # HMR-T50G
HMR TAPE, SANDSTONE, Part # HMR-T50S
Clean out expansion joint & run a grinder down both top edges. Back fill w/ dry sand.
Unroll material. Place in prepared expansion joint.
Installing HMR TAPE is as easy to use as counting to 3!
Apply heat to seal. Wait 5 minutes.
